ROTOR Shimano DuraAce 9100 螺絲蓋 SH110x4(不適用於DA9000)

描述

產品概述

ROTOR Shimano Dura-Ace 9100 螺絲蓋是專為將 ROTOR 齒盤安裝於 Shimano Dura-Ace 9100 四爪曲柄而設計的修飾蓋組。當你使用非 Shimano 原廠齒盤（如 ROTOR Q-Rings 或圓形齒盤）時，曲柄與齒盤之間會出現一段視覺上的落差。這組螺絲蓋與對應螺絲能精準填補此間隙，讓曲柄外觀俐落完整，同時提供穩固的鎖附。

主要特點

• 專用相容性：專為 Shimano Dura-Ace 9100 及 9150 Di2 四爪曲柄設計。

• 視覺修飾：填補曲柄與非原廠齒盤之間的落差，還原整潔外觀。

• 穩固鎖附：隨附專用螺栓，確保齒盤牢固安裝。

• 輕量材質：7075 T6 鋁合金，Type II 陽極處理。

技術規格

包裝內容

• 4 x 螺絲蓋

• 4 x T30 Torx 螺栓

備註

• 不適用於 Dura-Ace 9000：DA 9000 曲柄的接合處規格不同，需選購 DA 9000 專用版本。

• 亦不適用於 Shimano 105 R7000 或 R5800。

• 安裝時建議使用中等強度螺絲膠（如 Loctite 243），鎖附時需以手指固定螺絲蓋防止跟轉。

Product Overview

The ROTOR Shimano Dura-Ace 9100 Screw Cover Set is designed specifically for mounting ROTOR chainrings onto Shimano Dura-Ace 9100 4-arm cranksets. When using non-Shimano chainrings (such as ROTOR Q-Rings or round rings), a visible step-down appears between the crank and the chainring. These covers and matching bolts precisely fill that gap, restoring a clean, complete look while ensuring secure attachment.

Key Features

• Specific Compatibility: Designed for Shimano Dura-Ace 9100 and 9150 Di2 4-arm cranksets.

• Aesthetic Finish: Covers the step-down between crank and non-OEM chainrings for a clean look.

• Secure Mounting: Includes dedicated bolts for solid chainring attachment.

• Lightweight Material: 7075 T6 aluminium, Type II anodized.

Technical Specifications

Contents

• 4 x Screw Covers

• 4 x T30 Torx Bolts

Notes

• Not compatible with Dura-Ace 9000: The DA 9000 crank interface differs; a DA 9000-specific version is required.

• Also not compatible with Shimano 105 R7000 or R5800.

• Use medium-strength thread locker (e.g., Loctite 243) during installation. Hold the covers with your fingers while torquing to prevent them from spinning.